The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
Notes: - Should all video signal paths be in use on selection of AV because Copy is active for example, this situation is identified and the TV switches over to the next technically possible AV position. - On selection of the country Italy in the menu, an AV-RGB signal with blanking signal (Pin 16) has priority. - The blue screen background does not appear in all AV settings. AV socket configuration (dependent on the TV receiver) Socket Input AV1 RGB Output Switching Signal 6/12V (switching voltage) +1V (fastblanking) evaluation 6/12V 6/12V 6/12V + 1V evaluation 6/12V 6/12V 5V generated from sync
9. Changing the Picture Format
In AV mode, the picture format can be switched over with remote control button " " or the yelllow button in dependence of the size of the picture tube. The picture format is changed between 4:3 and 16:9 in AV mode and on the programme position with Peribit. This status is indicated by the switching voltage 6/12V applied to pin 8 of the AV 1 and AV 2 socket. - 4:3 format 12V - 16:9 format 6V (Necessary for 16:9 camcorder playback to compensate for the vertical extension because supply of the 6/12V switching voltage is not provided).