|
Who's Online
There currently are 5816 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
CUC 2030 N � CUC 2080 N
Abgleich / Alignment
3. Bildrohrplatte
Me�geräte: hochohmiges Voltmeter, Zweikanal-Oszilloskop mit Tastkopf 10:1. Servicearbeiten nach Austausch bzw. Reparatur: - Bildröhre, Bildrohrplatte Abgleich 3.1�3.3 - NVM IC82005: Abgleich 1.2�1.8, 2.1, 2.2, 3.1, 3.3
Abgleich 3.1 Wei�wert
Vorbereitung Schwarzwei�-Grautreppe mit Burst einspeisen. Kontrast ({) Maximum. Farbkontrast (i) Mittelwert. Bildschirmhelligkeit (v) Mittelwert. Dialogzeile "WHITE ADJUSTMENT" über " " (DIALOG CENTER) �> "OK" �> SERVICE �> "OK" �> Service Code "8500" aufrufen. Gerät in AV-Stellung. Schwarzbild einspeisen. Bildschirmhelligkeit: Graufläche gerade dunkel. Voltmeter über 220k� an Testpunkt R, G und B. Höchsten Spannungswert ermitteln. Voltmeter (220k�) oder Oszilloskop am Testpunkt mit höchster Spannung
Abgleichvorgang Mit den Tasten "z -" oder "+ g" die Werte für "Grün" bzw. "Blau" so einstellen, da� das Testbild unbunt wird. Kontrolle des Wei�abgleichs mit Kontrast Minimum und Maximum. Dialogzeile "End" mit "with mem." beenden.
3.2 Schirmgitterspannung UG2 mit TDA8375
Am Voltmeter 162,5V±2,5V mit Einstellregler UG2 auf der Bildrohrplatte einstellen. Oder mit OszÃlloskop lt. Skizze.
Schwarzwert
162,5V±2,5V 105-110V
3.3 Schirmgitterspannung UG2 mit TDA8843 oder TDA8844
Dialogzeile "Cut-off align" über " " (DIALOG CENTER) �> "OK" �> SERVICE �> "OK" �> Service Code "8500" aufrufen. Mit "OK" bestätigen.
Mit dem Einstellregler UG2 auf der Bildrohrplatte (oder Fokusblock) den zuerst erscheinenden roten, grünen, blauen oder mischfarbenen Strich gerade gut sichtbar einstellen. Mit "OK" zurück ins Menü.
GRUNDIG Service
9
|
|
|
> |
|